FIRMfoot® Epoxy

FIRMfoot® high-performance epoxies with grit incorporated for enhanced slip resistance. Ideal for walkways, boats, trucks, trailers, steps, and ramps where a non-skid surface is desired for added safety.

FIRMfoot® Epoxy

Get in touch +
About FIRMfoot® Epoxy

FIRMfoot® is a single component high-performance epoxy with a special grit incorporated for enhanced slip resistance. Ideal for walkways, boats, trucks, trailers, steps, and ramps where a non-skid surface is desired for added safety.

Use cases for FIRMfoot® Epoxy

• Ramps
• Boat Decks
• Steps
• Walkways
• Trucks
• Trailers

Benefits of FIRMfoot® Epoxy

• Single component
• Grit added
• Multiple substrates
• ASTM Tested
• Standard colors

TECHNICAL SPECIFICATIONS — FORREST FIRMfoot® Epoxy

29E series FIRMfoot® is an epoxy ester coating with grit, specifically designed for foot traffic on most properly prepared substrates, such as steel, fiberglass, treated aluminum, concrete, and wood.

29E Series
  • Volume solids (%)

    33 - 39 ± 2
  • VOC

    534 – 581 g/L
  • Theoretical Coverage (1.0 mil)

    529 – 625 ft²/gal
  • Recommended dry film thickness

    2 – 3 mils
  • Dry to Handle

    20 min
  • Color

    Wide Variety of colors available

96M series FIRMfoot® is a water reducible and water clean-up epoxy ester coating with grit, specifically designed for foot traffic on most properly prepared substrates, such as steel, fiberglass, treated aluminum, concrete, and wood. Less than 200 g/l VOC’s.

96M Series
  • Volume solids (%)

    30 - 39 ± 2
  • VOC

    154 - 199 g/L
  • Theoretical Coverage (1.0 mil)

    481 - 625 ft²/gal
  • Recommended dry film thickness

    2 - 3 mils
  • Dry to Handle

    45 min 1 hour
  • Color

    Wide Variety of colors available

1A29E series FIRMfoot® is an epoxy ester coating with grit, specifically designed for foot traffic on most properly prepared substrates, such as steel, fiberglass, treated aluminum, concrete, and wood. Packaged in aerosol cans for easy application.

1A29E Series
  • Theoretical Coverage

    12 - 15 ft²/can
  • Overspray Clean up

    Immediately w/ solvent
  • Dry Time

    20 - 30 min @ 77°F