FIRMfoot® Non-Slip Epoxy

FIRMfoot® high-performance non-slip epoxy with grit for enhanced traction. Ideal for walkways, boats, trucks, trailers, steps, and ramps where a non-slip surface is desired for added safety.

FIRMfoot® Non-Slip Epoxy

Get in touch +
About FIRMfoot® Non-Slip Epoxy

FIRMfoot® is a single-component high-performance non-slip epoxy with grit incorporated for enhanced slip resistance. Ideal for walkways, boats, trucks, trailers, steps, and ramps where a non-slip epoxy surface is desired for added safety.

Use cases for FIRMfoot® Epoxy

• Ramps
• Boat Decks
• Steps
• Walkways
• Trucks
• Trailers

Benefits of FIRMfoot® Epoxy

• Single component
• Grit added
• Multiple substrates
• ASTM Tested
• Standard colors

TECHNICAL SPECIFICATIONS — FORREST FIRMfoot® Epoxy

29E series FIRMfoot® is an epoxy ester coating with grit, specifically designed for foot traffic on most properly prepared substrates, such as steel, fiberglass, treated aluminum, concrete, and wood.

29E Series
  • Volume solids (%)

    33 - 39 ± 2
  • VOC

    534 – 581 g/L
  • Theoretical Coverage (1.0 mil)

    529 – 625 ft²/gal
  • Recommended dry film thickness

    2 – 3 mils
  • Dry to Handle

    20 min
  • Color

    Wide Variety of colors available

96M series FIRMfoot® is a water reducible and water clean-up epoxy ester coating with grit, specifically designed for foot traffic on most properly prepared substrates, such as steel, fiberglass, treated aluminum, concrete, and wood. Less than 200 g/l VOC’s.

96M Series
  • Volume solids (%)

    30 - 39 ± 2
  • VOC

    154 - 199 g/L
  • Theoretical Coverage (1.0 mil)

    481 - 625 ft²/gal
  • Recommended dry film thickness

    2 - 3 mils
  • Dry to Handle

    45 min 1 hour
  • Color

    Wide Variety of colors available

1A29E series FIRMfoot® is an epoxy ester coating with grit, specifically designed for foot traffic on most properly prepared substrates, such as steel, fiberglass, treated aluminum, concrete, and wood. Packaged in aerosol cans for easy application.

1A29E Series
  • Theoretical Coverage

    12 - 15 ft²/can
  • Overspray Clean up

    Immediately w/ solvent
  • Dry Time

    20 - 30 min @ 77°F
Read more about other FIRMLine® Products and FORREST Technical Coatings
FIRMMARKER® Traffic Marker Adhesive and Bonding Epoxy
Explore +
About FORREST Technical Coatings and Industrial Coatings Supply
Explore +