FORREST Epoxy Coatings

Forrest's comprehensive line of epoxy coatings suit industrial applications that require extreme chemical, solvent and corrosion resistance.

FORREST Epoxy Coatings

Get in touch +
About FORREST Epoxy Coatings

FORREST two-part epoxy coatings provide excellent solvent and corrosion resistance for industrial applications. Ideal for areas where a higher level of performance is required for chemical or solvent exposure.

Use Cases for FORREST Epoxy Coatings

• Interior equipment
• Pumps and motors
• Industrial floors
• Safety striping
• Industrial maintenance

Benefits of FORREST Epoxy Coatings

• Durable
• Chemical resistant
• Abrasion resistant
• Corrosion resistant
• Non-skid options

TECHNICAL SPECIFICATIONS — FORREST Epoxy Coatings

19S Series – A high-performance, two-part polyamide epoxy system formulated to protect surfaces exposed to chemicals, solvents or abrasion. Suitable for application on new equipment, structural steel and concrete. Available in non-skid for floor applications.

Series Technical Data information, can vary from color to color. This information is general, and correct to the best of our knowledge.

 

19S Series
  • Volume solids (%)

    55 ± 2
  • VOC

    3.18 ± 0.25 lb/gal
  • Theoretical Coverage (1.0 mil)

    882 ft²/gal
  • Recommended dry film thickness

    2.0 – 4.0 mils
  • Dry to Handle (77°F@50% RH)

    4 - 6 hours
  • Color

    Wide variety of color available

19P Series – A corrosion-resistant polyamide epoxy primer for use under high performance fast-dry topcoats.

Series Technical Data information, can vary from color to color. This information is general, and correct to the best of our knowledge.

19P Series
  • Volume solids (%)

    55 ± 2
  • VOC

    3.2 ± 0.25 lb/gal
  • Theoretical Coverage (1.0 mil)

    882 ft²/gal
  • Recommended dry film thickness

    2.0 – 4.0 mils
  • Dry to Handle (77°F@50% RH)

    4 - 6 hours
  • Color

    White, Black, Gray

819P Series – A two-component, specially-modified, polyamide-cured, high-build epoxy primer providing a very fast-dry topcoat and excellent resistance to corrosive and abrasive environments. Less than 2.8 lbs/gallon VOCs.

Series Technical Data information, can vary from color to color. This information is general, and correct to the best of our knowledge.

 

819P Series
  • Volume solids (%)

    55 ± 2
  • VOC

    3.2 ± 0.25 lb/gal
  • Theoretical Coverage (1.0 mil)

    882 ft²/gal
  • Recommended dry film thickness

    2.0 – 4.0 mils
  • Dry to Handle (77°F@50% RH)

    4 - 6 hours
  • Color

    White, Black, Gray

825S Series – A two-component, high-solids, chemical and corrosion resistant modified polyamidoamine epoxy formulated for excellent protection in severe environments. This product uses a special modified polyamidoamine curing agent that imparts the best properties of both amines and conventional polyamides.

Series Technical Data information, can vary from color to color. This information is general, and correct to the best of our knowledge.

825S Series
  • Volume solids (%)

    60 ± 2
  • VOC

    < 2.3 lbs./gallon
  • Theoretical Coverage (1.0 mil)

    962 ft²/gal
  • Recommended dry film thickness

    3 – 6 mils
  • Dry to Handle (70°F@50% RH)

    10 hours
  • Color

    Wide variety of color available