FORREST Technical Coatings About FORREST Chemical Resistant Epoxy Coating Line
FORREST’s two-part chemical resistant epoxy coating line provides excellent solvent and corrosion resistance for industrial applications. In areas with high risk or regular exposure to chemicals or solvents, FORREST epoxy coating products offer a higher level of performance to protect equipment and working surfaces.
Use Cases for FORREST Chemical Resistant Epoxy Coating Line
• Interior equipment
• Pumps and motors
• Industrial floors
• Safety striping
• Industrial maintenance
Benefits of FORREST Chemical Resistant Epoxy Coating Line
• Durable
• Chemical resistant
• Abrasion resistant
• Corrosion resistant
• Non-skid options
TECHNICAL SPECIFICATIONS — FORREST Chemical Resistant Epoxy Coating Line
19S Series – A high-performance, two-part polyamide chemical resistant epoxy coating system formulated to protect surfaces exposed to chemicals, solvents or abrasion. Suitable for application on new equipment, structural steel and concrete. Available in non-skid for floor applications.
Series Technical Data information can vary from color to color. This information is general, and correct to the best of our knowledge.
19S Series
-
Volume solids (%)
55 ± 2 -
VOC
3.18 ± 0.25 lb/gal -
Theoretical Coverage (1.0 mil)
882 ft²/gal -
Recommended dry film thickness
2.0 – 4.0 mils -
Dry to Handle (77°F@50% RH)
4 - 6 hours -
Color
Wide variety of color available
19P Series – A corrosion-resistant polyamide chemical resistant epoxy coating primer for use under high performance fast-dry topcoats.
Series Technical Data information can vary from color to color. This information is general and correct to the best of our knowledge.
19P Series
-
Volume solids (%)
55 ± 2 -
VOC
3.2 ± 0.25 lb/gal -
Theoretical Coverage (1.0 mil)
882 ft²/gal -
Recommended dry film thickness
2.0 – 4.0 mils -
Dry to Handle (77°F@50% RH)
4 - 6 hours -
Color
White, Black, Gray
819P Series – A two-component, specially-modified, polyamide-cured, high-build chemical resistant epoxy coating primer providing a very fast-dry topcoat and excellent resistance to corrosive and abrasive environments. Less than 2.8 lbs/gallon VOCs.
Series Technical Data information can vary from color to color. This information is general and correct to the best of our knowledge.
819P Series
-
Volume solids (%)
55 ± 2 -
VOC
3.2 ± 0.25 lb/gal -
Theoretical Coverage (1.0 mil)
882 ft²/gal -
Recommended dry film thickness
2.0 – 4.0 mils -
Dry to Handle (77°F@50% RH)
4 - 6 hours -
Color
White, Black, Gray
825S Series – A two-component, high-solids, corrosion resistant modified polyamidoamine chemical resistant epoxy coating formulated for excellent protection in severe environments. This product uses a special modified polyamidoamine curing agent that imparts the best properties of both amines and conventional polyamides.
Series Technical Data information can vary from color to color. This information is general and correct to the best of our knowledge.
825S Series
-
Volume solids (%)
60 ± 2 -
VOC
< 2.3 lbs./gallon -
Theoretical Coverage (1.0 mil)
962 ft²/gal -
Recommended dry film thickness
3 – 6 mils -
Dry to Handle (70°F@50% RH)
10 hours -
Color
Wide variety of color available